5.5 Uhlelo Lokunciphisa I-Polyaxial Pedicle Screw

Idizayini ye-low-notch core inciphisa ukucasuka kwezicubu ezithambile, ubuhlungu bangemva kokuhlinzwa, futhi yehlisa ubungozi bokunamathela kwe-anatomical.

Osayizi abakhethwa ngokomtholampilo (izinjongo ezimbaxambili ezi-5.5/6.0) bahlanganisa cishe u-90% wezinqubo zokuhlinzwa ezivamile, kuthuthukisa ukusungula.

Idizayini yokukhiya edidiyelwe esezingeni eliphansi ithuthukisa kakhulu ukuzinza kokumelana nokujikeleza futhi iqinisekisa ukulungiswa okuqinile, okuvikelekile.

Idizayini ye-Dual-Pitch & Multi-Angle

Lesi sikulufu sihlanganisa amasegimenti entambo amathathu ahlukene anephimbo eliguquguqukayo, esithuthukisa ukuthengwa kwekhorotiki nokuzinza. Isekela ngokugcwele ama-trajectories amaningi okulungisa ukuhlinzwa, ukuzivumelanisa ngokuphelele nama-anatomies omgogodla ahlukahlukene.

Ukulungiswa kweLumbar okuzinzile

Ama-X-ray angemuva kokuhlinzwa abonisa ukuzinza kwesigaba esikhethekile. Inikeza ukuqondanisa okuthembekile komgogodla kanye nokusekelwa okuphumelelayo kwe-intervertebral post-surgery.

Yendabuko vs. CBT Technique

Uma kuqhathaniswa nokulungiswa kwesikulufu se-pedicle okuvamile, indlela ye-Cortical Bone Trajectory (CBT) ivumela ukusika okuncane. Ngokubeka isikulufu sangemuva okwengeziwe, kunciphisa umonakalo ezicutshini ezithambile ezizungezile.

I-Brekaway Nut ne-MIS Curved Rod

Inati elihlukanisiwe elihlanganisiwe liqinisekisa ukuxhumana okuqinile, okuvikelekile, nokucacile ngokubonakalayo ne-MIS Curved Rod, okuqinisekisa ukuzinza okuphelele kokwakha.

• I-Lumbar spondylolisthesis

• Isifo se-disgenerative ngokungazinzi

• I-PLIF / Izinqubo ze-TLIF / OLIF

• I-Thoracolumbar vertebral fractures

• Ukulungiswa kwe-Scoliosis kanye ne-kyphosis

• Ukungaqini komgogodla kulandela i-laminectomy/discectomy

I-GB/T 13810-2017 & TC4 Titanium

• ✓ Yonke imikhiqizo isebenzisa ingxubevange ye-titanium evumelana ne-GB/T 13810-2017.

• ✓ Ifanelekele ukukhiqizwa kwe-TC4, iqinisekisa izakhiwo ezinhle kakhulu zemishini kanye nokumelana nokukhathala.

• ✓ Ukuhlolwa kwemishini kugcinwa kungobo yomlando iminyaka engu-3+, okuqinisekisa ukulandeleka okugcwele kwenqubo.

• ✓ Ilondolozwe ngezinga lekhwalithi elingu-≥98.9% ngokulawulwa okuqinile.

I-Sub-Micron CNC Machining

• ✓ Imikhiqizo ipholishwa kahle, iyagaya, futhi ifakwe i-oxidation ngombala ongaguquki kanye nokuba mahhadladla.

• ✓ I-CNC Turning, Milling, ne-Wire EDM yenziwe ngokunemba kokuhlinzwa kwe-sub-micron.

• ✓ I-Anodizing ethuthukisiwe, i-Electropolishing, kanye ne-Matte/Mirror Finishing.

• ✓ Ukujoyina okunamandla aphezulu kanye nokufakwa ngokucophelela kwezingxenye eziyinkimbinkimbi njengekhanda le-polyaxial.