Plate sitɛmu minnu bɛ datugu ani minnu tɛ datugu, burusi minnu bɛ bɛn ɲɔgɔn ma ani minɛn minnu bɛ kɛ ni fɛn misɛnninw ye, olu bɛ kɛ ka ɲɛsin proximal ulna fixation porozew ma minnu bɛ kɛ ɲɔgɔn fɛ.
配图建议01:尺骨近端与肘关节解剖模型叠加三类钢板应用位置,浅灰背景;建议尺寸1400 × 1100 px。
配图建议02:肘关节与尺骨近端解剖示意,标注鹰嘴、冠突和近端尺骨干区域建议尺寸1200 × 1200 px。
Taabolo lajɛlen
XC Medico bɛ anatomique locking plate ni standard ani reconstruction plate suganditaw fara ɲɔgɔn kan olecranon ni proximal ulna porozew kama. Fɛnɲɛnɛmafagalan denbaya kelen-kelen bɛɛ bɛ fara ɲɔgɔn kan n’a ka kurukuruni-platifɔmu kofɔlen ye ani minɛn misɛnninw sigicogo min bɛ bɛn o ma.
Baara kɛ ni... radius ni ulna implant portfolio walasa ka sanfɛla-yɔrɔw sigicogo kɛrɛfɛtaw suma ɲɔgɔn na. A ɲɛminɛbaga ka... plati minnu bɛ datugu ani minnu tɛ datugu, olu bɛ sigida wɛrɛw di portfolio labɛnni ma.
Sistɛmu Architecture (Système Architecture) ye
配图建议03:Ulna Olecranon Dalan plati 在尺骨近端的应用示意,显示左右侧轮廓与螺钉方向;建议尺寸 1000 × 700 px。
Plateforme anatomique numan/numan fɛ ni HA 3.5 cortical ani HC 3.5 locking screw suganditaw ye.
配图建议04:Olecranon Plate 在鹰嘴区域的应用示意,突出简洁钢板轮廓。;建议尺寸 1000 × 700 px
Sugandili jɛlen min tɛ datugu ni HA 3.5 cortical ani HB 4.0 cancellous screws ye.
配图建议05:Olecranon Reconstruction Plate 在近端尺骨的应用示意,展示左右侧弧形结构;建议尺寸 1000 × 700 px。
Nɛgɛjuru/numanbolo plati denbaya min tɛ datugu porozew kama minnu bɛ ɲini ka profil sigicogo kura ɲini.
Portfolio min bɛ kɛ ka fɛnw don a kɔnɔ
配图建议06:Ulna Olecranon Locking Plate 左右侧及3、4、6、8、10、12孔规格平铺图;建议尺寸 1400 × 1000 px。
Anatomie locking plateforme min dabɔra proximal ulna fixation kama, ni plate janya wɔɔrɔ ye numanbolo ni numanbolo anatomie kama.
配图建议07:Olecranon Plate 3至6孔完整规格及正反面产品图;建议尺寸 1200 × 900 px。
配图建议08:Olecranon Reconstruction Plate 左右侧3至6孔规格平铺图;建议尺寸 1200 × 900 px。
Portfolio Matrix (Matrix) ye
| Implant Denbaya | suguya | Size Range | Side | Screw Platform |
|---|---|---|---|---|
| Ulna Olecranon ka bɔgɔdaga | Kɔlɔsili | 3H, 4H, 6H, 8H, 10H, 12H ye ɲɔgɔn sɔrɔ | L / R. Bamako | HA 3,5 / HC 3,5 |
| Olecranon ka plati | Ko min tɛ da tugu | 3H-6H ye | Universel (dugukolo bɛɛ lajɛlen). | HA 3,5 / HB 4,0 ye |
| Olecranon ka baarakɛminɛnw labɛncogo kura | Ko min tɛ da tugu | 3H-6H ye | L / R. Bamako | HA 3,5 / HB 4,0 ye |
配图建议09:三类鹰嘴/近端尺骨钢板、HA 3.5、HC 3,5、HB 4.0螺钉及器械盒的系统总配置图;建议尺寸 1400 × 1100 px。
Dɛmɛn-yɔrɔ minnu bɛ yen
配图建议10:HC 3,5锁定螺钉、HA 3.5皮质骨螺钉和HB 4.0松质骨螺钉分组平铺图;建议尺寸 1400 × 1000 px。
Aw bɛ plati reference bɛɛ lajɛlen ni a ka locking, cortical walima cancellous screw denbaya kofɔlen kɛ ɲɔgɔn fɛ.
配图建议11:Opereli minɛn fitininw sigilen 2.7/3.5 mm完整器械盒俯拍图,重点展示导向、钻孔、测深、攻丝及螺钉安装工具; 1000 px。
Militiri 2,7/3,5 misɛnninw ka plateforme bɛ dɛmɛ don ka dɔgɔya, ka sɔgɔli, ka dunuya sumani, ka tapping ani ka kuru don, o la, baarakɛminɛnw bɛ kɛ HA 3,5 ani HB 4,0 juruw kama.
Taabolow ka ɲɔgɔndɛmɛ
配图建议12:横向流程图,展示解剖评估、复位、钢板选择、钻孔植入与影像确认;建议尺寸1600 × 720 px。
Sisεmεti Nafa
Datugulan dakunw datugucogo, sariyasun ani jɔli seginni cogoyaw poroze bolodalen kelen kɔnɔ.
Aw bɛ anatomique locking ni reconstruction plate references bɛn fan wajibiyalen ma.
Aw bɛ dingɛ jatew suma ka bɔ 3H sugandiliw la minnu ka surun ka tɛmɛ 12H datugulanw kan.
Aw bɛ platiw ni juruw fara ɲɔgɔn kan ni minɛnw jɔyɔrɔ misɛnnin kelen ye.
Sugandili Dɛmɛ
Aw ye nin poroze kunnafoni ninnu di walasa ka fɛnw doncogo, kurukuruw ani minɛnw labɛncogo sinsinni kɛ.
配图建议13:XC. Bamako, Mali Medico创伤钢板生产、精加工、质量检验与器械装配真实工厂照片拼图。
B2B Dɛmɛ
Plate, côté, taille ani vis configuration dɛmɛni.
Porozɛ minnu sinsinnen bɛ misali ni fɛɛrɛko seginnkanni jɛ-ka-baara.
Portfolio, katalogu ani kalan-minɛnw dɛmɛni.
Foroko, taamasiyɛn ani poroze wajibiyalenw dɛmɛni.
XC Medico ka baarakɛyɔrɔw sɛgɛsɛgɛ kolotugudaw OEM ni ODM baarakɛlaw ka porozɛw ye minnu bɛ kɛ ni mɔgɔ kelen-kelen bɛɛ ye ani minnu bɛ tila.
Kɔnɔna nafolomafɛnw
Ɲininkaliw
Ulna Olecranon Locking Plate bɛ numanbolo/numanbolo dacogo sugandi k’a ta 3H la ka se 12H ma. Olecranon Plate bɛ 3H-6H fixation compact non-locking di, ka sɔrɔ Reconstruction Plate bɛ numanbolo/numanbolo profiles fara o yɔrɔ kelen kan.
Kariyɔrɔ, ja minnu bɛ sɔrɔ, numanbolo/numanbolo, plati suguya min ka di, dingɛ jate wajibiyalen ani hakɛ makɔnɔnen tila ɲɔgɔn na. O b’a to plati, vis ani instrument références bɛ se ka lajɛ ɲɔgɔn fɛ.
Aw bɛ juruw bɛn plati denbaya tigitigi ma: HA 3,5 ani HC 3,5 ka ɲɛsin plati datugulan ma; HA 3.5 ani HB 4.0 ye plati fila ye minnu tɛ datugu. Aw bɛ janya wajibiyalenw dafa sani aw ka komandi kɛ.
RQBT01 bɛ dakun misɛnninw sɛgɛsɛgɛli, bilasirali, juguya sumani, tapping ani doncogo baarakɛcogo kunbabaw ɲɛfɔ, o la, baarakɛminɛnw bɛ sɔrɔ HA 3.5 ani HB 4.0 juruw kama. Kɔnɔkow labanw dafa ka kɛɲɛ ni labɛncogo sugandilen ye.
Awɔ. O laɲini bɛ se ka plati kɛrɛw ni u bonya sugandilenw fara ɲɔgɔn kan, kurukuruw hakɛ minnu bɛ bɛn ɲɔgɔn ma, RQBT01 minɛnw sigicogo ani porozɛ sɛbɛnw fara ɲɔgɔn kan walasa ka jateminɛ kɛ walima ka sanni kɛ.
Aw bɛ fɛnw doncogo tigitigi, a kɛrɛfɛ, dingɛ jate, kuru denbaya, minɛnw wajibiyalen, taayɔrɔ suguya ani sisan taamasiɲɛw dafa. O kɔfɛ, sɔrɔli bɛ se ka lajɛ i n’a fɔ sigida kelen min bɛ baara kɛ ɲɔgɔn fɛ.
Aw bɛ plati denbaya min ka di aw ye, kɛrɛfɛ, dingɛ jate, juru wajibiyalenw, minɛnw magow, taayɔrɔ suguya ani hakɛ jateminɛlen ci.
