Please Choose Your Language
Aw bɛ yan: So » Pelvic Ring Fracture Fixation Solution

XC Medico ka bɔnɛ furakɛli

Pelvic Ring Fracture Fixation Furakɛcogo

Titaniyɔmu plati suganditaw, vis plateformes matchés ani reconstruction minɛnw ka ɲɛsin pelvic ring fixation porozew ma.

Explore Plate Sugandiliw Sisεmεti bεnkan ɲinini配图 01:骨盆正位或斜位模型搭配Pelvic Plate与Reconstruction Locking Plate实物,分开展示两种选型;突出完整骨盆环,植入位置需专业审核,不画成两块钢板同时固定所有损伤。建议
Pelvic ring anatomie ni pelvic ani reconstruction locking plate suganditaw
尺寸 1400 × 1100 px。
Kɔnɔbara ɲɛfɛla ni kɔfɛla bololanɛgɛ anatomie
配图 02:骨盆环解剖正位图,用英文标注Foroba Sinfizi、Foroba Rami、Ilium、Sacrum、Sacroiliac Joint,区分前环与后环;不要把髋臼标为骨盆环的同义词。 建议尺寸 1200 × 1200 px。

Aw ye labɛn kɛ ka ɲɛsin bololanɛgɛ bɛɛ ma

Pelvic ring planning bɛ ɲɛfɛla ni kɔfɛ joginw bɛɛ jateminɛ. Nin portfolio in bɛ dɛmɛ don plate-based configurations ma minnu sugandira dɔgɔtɔrɔso jɛkulu fɛ.

Plateformes fila ye

Aw bɛ Pelvic Plate kɛrɛnkɛrɛnnen ni Reconstruction Locking Plate suma ɲɔgɔn na walasa ka a sirili wajibiyalen labɛn.

Denbaya minnu bɛ wele ko Screw, olu faranfasi

Aw bɛ HB 4.0 sira danfara ka bɔ HA 3.5 ni HC 3.5 sira la.

Fɛnɲɛnɛma-minɛnw (Instrumentation coordination) min bɛ Kɛ ɲɔgɔn fɛ

Aw bɛ basibɔn dɔgɔyali baarakɛminɛnw ni ɲɛjiralanw ni bolifɛnw fara ɲɔgɔn kan minnu wajibiyalen don fɛn donta sugandilen fɛ.

Fixation Region (Fixation Region) ɲɛfɔ

Pelvic ring ɲɛfɛla ni kɔfɛla labɛnni filɛli
配图 ye 03:骨盆前后双视角并列图,前环标注耻骨联合和耻骨支,后环标注骶骨与骶髂关节;以解剖分区为主,不画未经确认的螺钉轨迹、钻孔角度或固定适应证。建议尺寸 1400 × 900 px。

Bolo ɲɛfɛla

Aw bɛ simfasi walima cɛya ramus yɔrɔ, plati datugucogo bolodalen ani kurukuruw cogoya wajibiyalenw ɲɛfɔ.

Kɔnɔna-bololanɛgɛ

Kɔfɛ jogin minnu bɛ tali kɛ ɲɔgɔn na, olu ka kan ka kɛ kɛnɛyaso ka jateminɛ wɛrɛ la. Plate anterior configuration dɔrɔn tɛ fixation plan dafalen ɲɛfɔ.

Pelvic Plate Sugandili minnu bɛ kɛ

Titanium Pelvic Plate min bɛ dingɛ jate sugandicogo duuru la
配图 04:Kɔnɔbara basigilen Plate的4、6、8、10、12孔完整规格实物平铺,保持相同比例与浅灰背景;忠实保留产品孔型,不添加锁定孔或未经证实的左右侧版本。建议尺寸 1200 × 900 px。

Plaque pelvique (Plaque de pelvique) ye

Titanium non-locking plate denbaya min bɛ kɛ ka basibɔn sirili boloda.

Dingɛ minnu bɛ sɔrɔ
4 / 6 / 8 / 10 / 12
Plateforme de vis
HB 4.0. Bamako, Mali
View Pelvic Plate
Titanium Reconstruction Locking Plate bɛ dingɛ jate sugandicogo wolonwula kɔnɔ
配图 05:Jiginni kura dacogo Plate的5、6、7、8、9、10、12孔实物平铺,以锁定板手册中的真实孔型为准;不要用其他部位的预弯钢板代替。建议尺寸 1200 × 900 px。

Reconstruction Locking Plate (Dɔ̀gɔjidacogo kura).

Titaniyɔmu sigicogo kura denbaya min bɛ ni dasiri ni kɔri kuru suganditaw ye ka ɲɛsin basibɔn baara sugandilenw ma.

Dingɛ minnu bɛ sɔrɔ
5 / 6 / 7 / 8 / 9 / 10 / 12
Plateformes de vis
HA 3,5 / HC 3,5. Bamako, Mali
A ye Reconstruction Locking Plate lajɛ

A’ ye Configuration Complète (Labɛnni dafalen) bɛn ɲɔgɔn ma

HB 4.0 ye

Pelvic Plate sira

Pelvic Plate, cancellous screws sugandilenw ani pelvic reconstruction minɛnw.

3,5 mm ye

Locking Plate Sira

Reconstruction Locking Plate, HA / HC screws ani a bɛ bɛn o ma, fɛn misɛnninw ɲɛminɛbagaw ni bolifɛnw.

4,0 mm full-threaded cancellous screws walasa ka cogoya lajɛ
配图 06:4,0 mm全螺纹松质骨螺钉不同长度实物组合,突出真实螺纹和头部细节E与HB 4,0路径对应,不混入6,5 mm规格。

4,0 mm Kansɛri sɔgɔlenw

Sugandili dafalenw bɛ bɔ milimɛtɛrɛ 12 na ka se milimɛtɛrɛ 50 ma, milimɛtɛrɛ 2 faralen ɲɔgɔn kan.

Aw ye kansɛriw lajɛ
HA 3.5 cortical ani HC 3.5 locking screw plateformes (kɛrɛnkɛrɛnnenya la
配图 07:HA 3.5皮质骨螺钉与HC 3.5锁定螺钉分组实拍,放大头部和螺纹区别;英文标签清晰,不写全兼容。 建议尺寸 1200 × 900 px。

HA 3,5 & HC 3,5

Aw bɛ kuru suguya, kunkolo cɛmancɛ ani janya bɛn ni seginkanni plati sugandilen ye.

Sɛgɛsɛgɛli kɛ locking screw suganditaw la

Pelvic Segin-ka-bɔ-minɛnw

Pelvic Reconstruction Plate Instrument Set ni reduction ani plate-contouring baarakɛminɛnw ye
配图 08:Pelvic Reconstruction Plate Minɛn Set完整器械盒俯拍,按真实清单展示复位钳、球头顶棒、弯板器、骨盆模板、导钻和测深工具;不要加入植入物充当套装自带内容。建议尺寸 1400 × 1000 px。

Pelvic Reconstruction Plate minɛnw sigilen don

Pelvic-specific reduction, plate contouring ani screw labɛnni baarakɛminɛnw labɛnna minɛn kelen kɔnɔ.

Dɔgɔyali Bolo sɔgɔlenw, kolotugudaw ani basibɔn dɔgɔyali foroko.
Fali labɛncogo Basɔgɔninjɛ mɔli plati, reconstruction moule plati ani kuruli baarakɛminɛnw.
Drilling & Measurement Drill guides, drill bits ani 0-60 mm juguya jateminɛnan.
Kuru doncogo SW2.5 bolifɛnw, kuru minɛyɔrɔ ani 4,0 mm pompi.
Aw ye basibɔn labɛncogo kura lajɛ
Opereli minɛn misɛnniw sigicogo milimɛtɛrɛ 2,7 ani 3,5 ni u ma don a la
配图 09:Opereli minɛn fitininw sigicogo (2,7/3,5 mm) - No Implant完整器械盒实拍,突出对应导向器与驱动工具;不要混用Fully版本或把钢板螺钉放入图中。建议尺寸 1400 × 1000 px。

Opereli minɛn fitininw sigilen

2,7/3,5 mm plateforme bɛ drill bolow, dunni jateminɛnanw, pompiw ani bolifɛnw di walasa ka fɛn misɛnninw labɛn.

Aw bɛ ɲɛminɛbagaw ni bolifɛnw tigitigiw sugandi minnu bɛ segin-ka-bɔnye plati ni kurukuruw lamini. Fɛn minnu bɛ don mɔgɔ la, olu bɛ di danfara la No Implant set kama.

Aw ye minɛn fitininw lajɛ

Fixation Planning Lajɛba

Pelvic ring fixation planning planning overview ka bɔ jateminɛ na ka se sɛgɛsɛgɛli ma
配图10:横向五步示意:整体骨盆环影像评估、确认固定区域、匹配钢板螺钉、准备对应器械、影像与配置确认;仅作流程概览,不提供钻孔角度或具体手术参数。建议尺寸 1600 × 720 px。
  1. Aw bɛ Ring Review ɲɛfɛla ni kɔfɛ joginda cogoyaw jateminɛ.
  2. Labɛn ɲɛfɔ Aw bɛ fiɲɛbɔyɔrɔw dafa ni dɔgɔtɔrɔso jɛkulu ye.
  3. Aw bɛ Plate Match plate denbaya, dingɛ jate ani screw platform sugandi.
  4. Minɛnw labɛn Dɔgɔyali baarakɛminɛnw, ɲɛjiralanw ani bolifɛntigiw sinsin.
  5. Sɛgɛsɛgɛli Aw bɛ dɔgɔtɔrɔso jɛkulu ka ja lajɛw ni fɛnw doncogo sɛgɛsɛgɛliw labato.

Sistɛmu sugandili gafe

Fixation Scope (Fixation Scope) ye

Aw bɛ basibɔn bololanɛgɛ yɔrɔ dɔn ani ni kɔfɛla sirili danfaralen ye labɛn dɔ ye.

Tabali Datugucogo

Aw bɛ plati denbaya ni dingɛ jate wajibiyalenw dafa sani aw ka hakɛw sigi.

Interface (Interface) min bɛ wele ko Vis

Aw bɛ HB 4.0 ni HA / HC 3.5 cogoyaw to ɲɔgɔn na. Janya ni baarakɛminɛn minnu bɛ bɛn ɲɔgɔn ma, olu dafa.

Supply Scope (Baarakɛyɔrɔ).

Aw bɛ fɛn dontaw hakɛw, minɛnw sigicogo, u foroko ani u taayɔrɔ-sɔgɔli sɛbɛnw ɲɛfɔ.

Manufacturing & Porozɛ Dɛmɛ

XC Medico ka fɛnw doncogo masinw sɛgɛsɛgɛli ani minɛnw lajɛcogo
配图 11:沿用XC. Bamako, Mali Medico真实工厂照片,组合钢板加工、尺寸检验和器械装配场景,画面简洁统一;不要生成虚构工厂、证书、客户或设备数量。建议尺寸 1400 × 1000 px。

Implants & Instruments (minɛnw doncogo).

Aw bɛ plati hakɛw, juruw hakɛw ani minɛnw wajibiyalenw ɲɛnabɔ porozɛ surun kelen kɔnɔ.

Pelvic Ring Fixation Ɲininkaliw

O plati fila sugandilenw tɛ kelen ye cogo di?

Pelvic Plate ye titaniyɔmu denbaya ye min tɛ datugu, ni dingɛ 4, 6, 8, 10 ani 12 sugandilenw bɛ a la ni HB 4.0 juruw ye. Reconstruction Locking Plate bɛ dingɛ 5, 6, 7, 8, 9, 10 ani 12 dilan ni HA 3.5 ani HC 3.5 juruw ye. Dɔgɔtɔrɔso bolodacogo de bɛ sugandi bɛnnen jira.

Yala nin cogoya in bɛ basi-bɔn joginni bɛɛ datugu wa?

Ayi, ɲɛ in bɛ fɛnw sugandilenw jira minnu bɛ bɔ plati la. Kɔfɛbolo joginni bɛ se ka kɛ sababu ye ka a siricogo wɛrɛ kɛ; dɔgɔtɔrɔso jɛkulu ka kan ka basibɔn bololanɛgɛ dafalen jateminɛ sani sigida ka sugandi.

Yala kuru denbayaw bɛ se ka ɲagami platiw ni ɲɔgɔn cɛ wa?

Aw kana fɛn wɛrɛw bila u nɔ na plateformew bɛɛ kɔnɔ. Pelvic Plate bɛ HB 4.0 jira, ka sɔrɔ Reconstruction Locking Plate bɛ HA 3.5 ani HC 3.5 jira. Aw bɛ a jira ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ.

Yala minɛnw kulu kelen bɛna sira fila bɛɛ dɛmɛ wa?

Pelvic set bɛ basibɔn dɔgɔyali ni plati labɛnni baarakɛminɛnw di. Locking configuration fana mago bɛ guides ni drivers la minnu bɛ bɛn a ka screw interface ma. Aw bɛ minɛnw lisɛli dafa sira sugandilen na sani aw ka komandi kɛ.

Yala asetabulari platiw bɛ o hakɛ la wa?

Kɔfɛ kogo ni koloma kɛrɛnkɛrɛnnenw ka platiw bɛ fura suguya wɛrɛ sugandi. Aw bɛ asetabulɛri wajibiyalenw to ɲɔgɔn na ni aw bɛ basibɔn bololanɛgɛ labɛncogo ɲini.

Ne ka kan ka mun ci walasa ka quotation sɔrɔ?

Aw bɛ plati denbayaw ni dingɛ jatew ci, kuru suguyaw ni u janya, hakɛw, minɛnw magow ani taayɔrɔ suguya. Aw bɛ pakew walima mɔgɔ kelen-kelen ka sɛbɛn wajibiyalenw don a kɔnɔ ni o bɛ bɛn.

Aw ye bɔnɛ furakɛcogo wɛrɛw sɛgɛsɛgɛ

Aw ye fixation portfolios lajɛ ka kɛɲɛ ni anatomie maraw ye.

Trauma & fracture fixation furaw

Aw bɛ aw ka basi-bɔn labɛncogo jɔ

Aw ka aw ka plati sugandili, aw ka juruw hakɛ, minɛnw magow ani u hakɛw tila ɲɔgɔn na walasa ka fɛnw bɛn ɲɔgɔn ma cogo jɛlen na.

Sistɛmu bɛnkan ɲinini

Ka ɲɛsin baarakɛlaw ka sistɛmu bolodacogo ma. Dɔgɔtɔrɔso sugandili ni minɛnw tali ka kan ka tugu banabagatɔw ka jateminɛ na ani baarakɛcogo la minnu dabɔra.

xc-dɔgɔtɔrɔso-logo
I n’a fɔ diɲɛ kɔnɔ mɔgɔ min dalen bɛ a la Orthopaedic Implants Manufacturer , XC Medico ka baara ɲɛsinnen bɛ furakɛli fura ɲumanw dili ma, i n’a fɔ Trauma, Spine, Joint Reconstruction, ani Sports Medicine implants. Ni an ka dɔnniya bɛ san 19 ni kɔ kɔnɔ ani ISO 13485 seereyaw fɛ, an b’an yɛrɛ di ka opereli minɛnw ni fɛn minnu bɛ don u kɔnɔ, olu di dilanbagaw ma, dɔgɔtɔrɔsow, ani OEM/ODM jɛɲɔgɔnw ma diɲɛ kɔnɔ.

Lien teliyalenw

Ka wele

Tianan Sibɛri dugu, Changwu cɛmancɛ sira, Changzhou, Sinuwa jamana na
86- 17315089100 ye

To ka ɲɔgɔn sɔrɔ

Ni aw b’a fɛ ka kunnafoni wɛrɛw sɔrɔ XC Medico kan, aw bɛ se ka aw tɔgɔ sɛbɛn an ka Youtube kan, walima ka tugu an kɔ Linkedin walima Facebook kan. An bɛna to k’an ka kunnafoniw kuraya i ye.
© COPYRIGHT 2026 常州希程帝衫科技有限公司. HAKƐLA BƐƐ BƐ SƆRƆ.