5.5 Ho'ēmi Polyaxial Pedicle Screw System

ʻO ka hoʻolālā kumu haʻahaʻa haʻahaʻa e hōʻemi i ka ʻeha o ka ʻiʻo palupalu, ka ʻeha postoperative, a hoʻemi i ka pilikia o nā adhesion anatomical.

ʻO nā nui i makemake nui ʻia ma ke kino (5.5/6.0 mau kumu ʻelua) e uhi ana ma kahi o 90% o nā kaʻina hana maʻamau, e hoʻonui ana i ka waihona.

ʻO ka hoʻolālā laka haʻahaʻa i hoʻohui ʻia e hoʻomaikaʻi nui i ka paʻa anti-rotation a hōʻoia i ka paʻa paʻa paʻa.

Hoʻolālā ʻelua-Pitch & Multi-Angle

Hōʻike kēia wili i ʻekolu mau ʻāpana milo like ʻole me ka pitch variable, hoʻonui i ke kūʻai cortical a me ka paʻa. Kākoʻo piha ʻo ia i nā trajectories hoʻoponopono ʻokiʻoki, hoʻololi pono i nā anatomies spinal like ʻole.

Paʻa Lumbar Paʻa

Hōʻike nā kukui X postoperative i ke kūpaʻa ʻokoʻa. Hāʻawi ia i ka alignment spinal hilinaʻi a me ke kākoʻo intervertebral maikaʻi ma hope o ka ʻoki ʻana.

Kuʻuna vs. CBT Technique

Hoʻohālikelike ʻia me ka hoʻopaʻa ʻana o ka pedicle screw maʻamau, hiki i ka ʻenehana Cortical Bone Trajectory (CBT) ke hana i nā ʻoki liʻiliʻi. Me ka hoʻokomo ʻana i hope, hoʻemi ia i ka pōʻino i nā ʻiʻo palupalu a puni.

Breakaway Nut & MIS Curved Rod

Hoʻopaʻa ʻia ka pilina paʻa, paʻa, a ʻike maka ʻia me ka MIS Curved Rod, e hōʻoiaʻiʻo ana i ka paʻa o ke kūkulu ʻana.

• Lumbar spondylolisthesis

• ʻO ka maʻi disc degenerative me ka paʻa ʻole

• Nā kaʻina hana PLIF / TLIF / OLIF

• ʻO nā haʻihaʻi vertebral Thoracolumbar

• Scoliosis a me kyphosis hoʻoponopono

• ʻO ka hiki ʻole o ke kuamoʻo ma hope o ka laminectomy/discectomy

GB/T 13810-2017 & TC4 Titanium

• ✓ Hoʻohana nā huahana a pau i ka titanium alloy e like me GB/T 13810-2017.

• ✓ Kūpono no ka hana TC4, e hōʻoia ana i nā waiwai mechanical maikaʻi loa a me ke kūpaʻa luhi.

• ✓ Hoʻopaʻa ʻia nā hoʻāʻo mīkini no 3+ mau makahiki, e hōʻoia ana i ka traceability piha.

• ✓ Mālama ʻia ma kahi ≥98.9% ka nui o ka maikaʻi me ka mana koʻikoʻi.

Sub-Micron CNC Mīkini

• ✓ Hoʻomaʻamaʻa maikaʻi ʻia nā huahana, wili, a me ka hoʻoheheʻe ʻia no ka waihoʻoluʻu a me ka ʻala.

• ✓ Hoʻololi ʻia ʻo CNC, Milling, a me Wire EDM i hoʻokō ʻia no ka pololei o ka ʻokiʻoki sub-micron.

• ✓ Anodizing kiʻekiʻe, Electropolishing, a me Matte/Mirror Finishing.

• ✓ ʻO ka hoʻohui ʻana i ka ikaika kiʻekiʻe a me ka hoʻopili pono ʻana i nā ʻāpana paʻakikī e like me ke poʻo polyaxial.