High-Speed ​​Maykro Ilɛktrik Spin Dril

Mikro Ilektrikal Spine Drill Sistem

Wan ay-spid ɔspitul pawa tul sistɛm we dɛn bin divɛlɔp fɔ sɛlɛkɛt bon grindin, drɔlin ɛn kɔt prosidyuz dɛn na spayna ɔpreshɔn, nyurosɔjri ɛn maykrosɔjmɛnt aplikeshɔn dɛn. Di sistem de kam togɛda wan dijital kɔntrol, stret ɛn angul hanpies, fut-pedal ɔpreshɔn ɛn bɔku bɔku bur opshɔn dɛn.

High-Speed ​​Bon Grinding fɔ Spayn ɛn Nyurosɔjri

Di Maykro Ilɛktrik Spin Dril na fɔ gi kɔntrol ay-spid ɔpreshɔn fɔ sɔm wok dɛn we dɛn kin du fɔ grind bon, drɔ ɛn kɔt. I kompakt hanpies dεm εn intachεnjεbl bכr dεm de sכpכt akses insay sכm כ dip anatomical wok εria dεm.

Di dijital ɔs kɔntrol de gi adjɔstabl rɔta spid, we di fut pedal de alaw fɔ aktiv we nɔ nid di ɔpreshɔn fɔ rilis di hanpies. Stret ɛn angul hanpies opshɔn dɛn de sɔpɔt difrɛn wok ɔriɛnteshɔn dɛn.

Faynal hanpies, bur ɛn ɔpreshɔn-spid sɛlɛkshɔn fɔ fala di instrɔkshɔn dɛn we dɛn dɔn gri fɔ, di tin dɛn we dɛn nid fɔ du ɛn di tin dɛn we di ɔspitul kin lɛk.

Dijital Hɔst Kɔntrola

Di ɔs de gi dijital ɔpreshɔn displei, adjɔstabl spid kɔntrol ɛn fɔwad ɔ rivas rɔteshɔn sɛlɛkshɔn.

Stret Handpiece we de mek pɔsin in an

Di stret hanpies de sɔpɔt dairekt akses ɛn kɔntrol pozishɔn di tɛm we dɛn de pik drɔlin ɔ grindin prosidyuz.

Angled Handpiece we gɛt wanwɔd

di angled hanpis de gi wan כda wok oryenteshכn fכ sεlekt sכm sכm כ difεl fכ rich anatomical εria dεm.

Fut Pedal Kɔntrol

di fut pedal de sכpכt han-fri aktibכshכn εn כpεrayshכn kכntrכl we di sכjaman de mεnten di hanpies posishכn we i pik.

Kɔt ɛn Daymɔnd Bɔrs

difrεn kכt-tayp εn εmεri כ dayamכnd-kכt bכr dεm de fכ sεlekt fכ pul bon εn sכfa-finish rikwaymεnt dεm.

Sterilayzeshɔn Kes

Wan dediket kes ɔganayz kɔmpitabl hanpies, kebul ɛn aksesɔri fɔ transpɔt, stɔrɔj ​​ɛn validet sterilayzeshɔn prɔsesin.

Mɔtɔ we gɛt Ay-Spid

Di moto de sɔpɔt ɔpreshɔn te to 40,000 rpm wit adjɔstabl spid kɔntrol.

Bidayrɛkshɔn Rotashɔn

Fɔwad ɛn rivas mɔd dɛn de gi ɔda rɔta dairekshɔn dɛn akɔdin to di bur ɛn ɔpreshɔn tɛknik we dɛn dɔn pik.

Di we aw dɛn de handle we dɛn de kɔntrol

Di kompakt hanpies konfigyushɔn de disayn fɔ sɔpɔt stebul hanlin insay sɔm sɛlɛkɛt maykrosɔjik wok eria dɛn.

Komponent dɛn we dɛn kin sterilize

Dɛn mek spɛsifikɛd hanpis ɛn kebul dɛn fɔ prosɛs na tɛmpracha we go rich 135°C akɔdin to di instrɔkshɔn dɛn we de.

Opshɔn dɛn fɔ kɔt ɛn Ɛmɛri Bɔr

di sistεm kin kכnfigyut wit mכltipכl bur jכometri fכ sεlekt bon kכt, grind εn finish rikwaymεnt dεm.

Inspɛkt Bifo Yu Yuz am

Chek di kɔntrol, kebul, hanpies intafɛs, bur kɔnɛkshɔn ɛn fut pedal bifo yu wok.

Kɔnfɛm Burr Kɔmpatibiliti

Yuz ɔl di bur dɛn we kɔmpitabl wit di hanpies we yu dɔn pik, intafɛs ɛn rɔteshɔnal-spid rɛnj.

Fɔ fala di Validated Processing

Klin, disinfɛkshɔn ɛn sterilayzeshɔn fɔ fala di instrɔkshɔn dɛn we de ɛn di fasiliti protɔkɔl.

Sistem Match we dɛn de mek

Kontrola, hanpis, kebul, pedal ɛn bur rikwaymɛnt dɛn kin rivyu bifo kot.

Burr Kɔnfigyushɔn

Yu kin tɔk bɔt aw fɔ kɔt ɛn dayamɔn bɔr akɔdin to di aplikeshɔn we yu dɔn pik.

Opareshɔn Sɔpɔt

Dɛn kin gi di fim dɛn we de fɔ di prɔdak ɛn di tin dɛn we dɛn kin yuz fɔ wok fɔ mek dɛn no di prɔdak.

OEM / ODM Evalueshɔn

OEM ɛn prayvet-lɛbul rikwaymɛnt dɛn kin rivyu akɔdin to spɛsifikɛshɔn, kwantiti ɛn target makɛt.

Wetin na di maksimal ɔpreshɔn spid?

Di list maksimal spid na 40,000 rpm wit steplɛs spid rigyuleshɔn.

Us hanpiks dɛn de?

Di standad konfigyushɔn inklud stret ɛn angul hanpis opshɔn dɛn. Dɛn fɔ kɔnfɔm se i gɛt lɔng handel we dɛn de kot.

Us kayn burr dɛn kin saplae?

Di opshɔn dɛn we de kin inklud fluted cutting burrs ɛn emery ɔ dayamɔn-coated grinding burrs in difrɛn profayl dɛn.

Yu tink se dɛn kin sterilayz di hanpiks?

Dɛn mek spɛsifikɛd hanpies ɛn kebul dɛn fɔ prosɛs na tɛmpracha we go rich 135°C. Fɔ fala di instrɔkshɔn dɛn we de fɔ klin ɛn sterilayz.