Please Choose Your Language
You are here: Home » Procedures » Trauma & Fracture Fixation Solutions » Femoral Neck Fracture Fixation Solution

Femoral Neck Fracture Fixation Solution

7.3 mm cannulated screws, optional washers and dedicated instruments for selected femoral neck fixation cases.

Explore Components Request System Matching
Femoral neck anatomy with a cannulated screw fixation illustration
配图01：股骨近端解剖模型与7.3 mm空心螺钉固定示意，突出股骨颈，不混入髓内钉或FNS；1400 × 1100 px。植入位置须专业审核。
Femoral head, femoral neck and trochanteric region anatomy
配图02：股骨近端正位与侧位解剖图，英文标注股骨头、股骨颈及转子区域，明确部位边界；1200 × 1000 px。

A Focused Screw Fixation Option

For cases where the treating surgeon selects internal fixation. Fracture displacement, stability and bone quality guide the treatment choice.

Fixation Approach

Cannulated screw fixation of the femoral neck.

Patient Selection

Not a universal solution for every hip fracture or a replacement for arthroplasty assessment.

Implant Configuration

7.3 mm partially threaded cannulated screws and optional 7.3 mm washers
配图03：7.3 mm部分螺纹空心螺钉按不同长度平铺，辅以空心头部细节及独立垫圈，不改动真实螺纹；1400 × 1000 px。

7.3 mm Cannulated Screw

Partially threaded design with a choice of lengths for the planned fixation construct.

Diameter
7.3 mm
Length range
50-115 mm
Length increments
5 mm
Optional washer
7.3 mm
7.3 mm cannulated screw

Washer selection: confirm the washer reference and screw-head fit. Use is determined by the surgeon, not automatically required for every screw.

Dedicated Cannulated Instruments

6.5 and 7.3 mm Cannulated Screw Instrument Set with trays and tools
配图04：6.5/7.3 mm空心螺钉器械套装完整实拍，三个器械盘横向排开，突出导针、导向器、测深器与螺丝刀；1600 × 600 px。不添加未列入清单的工具。

6.5/7.3 mm Cannulated Screw Instrument Set

Coordinate the 7.3 mm instruments with the selected screw references. Confirm tray contents before ordering.

Cannulated screw instrument set

Guide & Measure

Guide pins, guides, sleeves and depth gauge.

Prepare & Insert

Cannulated drills, holding sleeves, handles and hex drivers.

Procedure Overview

Imaging assessment, fixation planning, component matching and final verification
配图05：横向四步概览，影像评估、固定规划、组件匹配、最终影像确认；1600 × 720 px。不标导针角度、钻孔深度或操作参数，医学示意须专业审核。
  1. Assess the fracture
  2. Plan fixation
  3. Match components
  4. Verify placement

Overview only, not operative instructions. Implant choice and placement require surgeon assessment and the applicable instructions for use.

System Selection Guide

Screw Lengths

Define the required lengths and quantities within the 50-115 mm range.

Thread & Washer

Confirm the selected thread configuration and any washer requirement.

Instrument Fit

Check guide pins, sleeves and driver interfaces against the exact screw reference.

Supply Requirements

Confirm packaging, market documentation and estimated order quantity.

XC Medico implant manufacturing, inspection and instrument assembly
配图06：沿用XC Medico真实生产、螺钉质检与器械装配照片，建议三图拼接；1400 × 1000 px，不使用AI工厂图。

Manufacturing Support

Explore our orthopedic implant manufacturing capabilities and discuss implant, instrument and packaging requirements for your market.

Quality control

Frequently Asked Questions

Is screw fixation suitable for every femoral neck fracture?

No. Displacement, fracture stability, bone quality and patient factors affect treatment selection. The treating surgeon determines whether fixation or another treatment is appropriate.

Can I substitute any 7.3 mm screw or instrument?

No. Diameter alone does not establish compatibility. Confirm the screw reference, guide pin, driver interface and sleeves as one configuration.

Are washers and implants included in the instrument set?

List screws and washers separately in the order. Confirm the instrument set contents and any optional components before purchasing.

Which lengths can be supplied?

The featured partially threaded screw spans 50-115 mm in 5 mm increments. Confirm the required quantities and current availability when requesting a quote.

Explore more trauma fracture fixation solutions.

Build Your Fixation Configuration

Send screw lengths, washer needs, instrument requirements, destination market and estimated quantities.

Request System Matching
xc-medical-logo
As a globally trusted Orthopedic Implants Manufacturer, XC Medico specializes in providing high quality medical solutions, including Trauma, Spine, Joint Reconstruction, and Sports Medicine implants. With over 19 years of expertise and ISO 13485 certification, we are dedicated to supplying precision engineered surgical instruments and implants to distributors, hospitals, and OEM/ODM partners worldwide.

Quick Links

Contact

Tianan Cyber City, Changwu Middle Road, Changzhou, China
86-17315089100

Keep In Touch

To know more about XC Medico, please subscribe our Youtube channel, or follow us on Linkedin or Facebook. We’ll keep updating our information for you.
© COPYRIGHT 2026 常州希程帝衫科技有限公司. ALL RIGHTS RESERVED.