XC Medico Trauma Solutions
A focused 2.4 mm locking plate platform for radial head fixation projects.
配图建议01：肘关节与桡骨近端解剖模型，叠加桡骨头锁定板应用位置，突出桡骨头而非桡骨远端；建议尺寸 1400 × 1100 px。
配图建议02：肘关节外侧解剖示意，清晰标注 capitellum、radial head、radial neck 和 proximal radius；建议尺寸 1200 × 1200 px。
The solution centers on an anatomic plate family designed for the radial head region. Left and right configurations, three plate lengths and a 2.4 mm screw platform support focused system planning.
For adjacent upper-limb requirements, review the broader radius and ulna implant portfolio.
配图建议03：桡骨头锁定板在肘关节外侧的应用示意，显示钢板轮廓、桡骨头覆盖范围和螺钉方向；建议尺寸 1200 × 850 px。
The plate family is intended for project planning around radial head fixation. Implant choice remains subject to patient anatomy, fracture pattern, approved labeling and surgeon judgment.
配图建议04：左右侧桡骨头锁定板并列搭配左右桡骨近端轮廓，突出侧别匹配；建议尺寸 1000 × 800 px。
Left and right plate options help buyers match the requested anatomy before confirming sizes, screws and instruments.
Implant Platform
配图建议05：Capitulum Radialis Locking Plate 全系列产品平铺图，展示左右侧及 3H、4H、5H 六种规格；建议尺寸 1400 × 1100 px。
A titanium locking plate family for the radial head region, organized by side and hole count for straightforward project matching.
Plate, screws and instruments are matched as one project configuration.
配图建议06：桡骨头锁定板局部特写，展示解剖轮廓、锁定孔布局和板体厚薄关系；建议尺寸 1200 × 900 px。
Six side-and-length combinations create a concise product family without mixing unrelated radius implants.
Explore plate配图建议07：2.4 mm HC 锁定螺钉与 HA 皮质骨螺钉分组平铺，展示 6-30 mm 长度范围和螺纹细节；建议尺寸 1100 × 900 px。
HC locking and HA cortical screws are available from 6-30 mm in 2 mm increments.
View screws配图建议08：1.5/2.0/2.4 mm Micro Fragment Locking Instrument Set 完整器械盒俯拍图，突出 2.4 mm 导向、钻孔、测深、攻丝和 T8 安装工具；建议尺寸 1400 × 1000 px。
The no-implant set supports the 2.4 mm drilling, guiding, measuring, tapping and insertion workflow.
View instrument set配图建议09：系统总配置图，将桡骨头锁定板六种规格、2.4 mm 锁定及皮质骨螺钉、器械盒整合在同一画面；建议尺寸 1500 × 1100 px。
Combine the requested plate side and length with matching screw ranges, instruments and project documentation.
配图建议10：横向流程图，展示解剖与影像评估、复位、侧别与板长选择、2.4 mm 螺钉植入和影像确认；建议尺寸 1600 × 720 px。
Review anatomy, imaging and fracture characteristics.
Follow the treating surgeon's reduction plan.
Confirm side, hole count and screw requirements.
Use the matched plate, screws and instruments.
Confirm construct position under the clinical protocol.
The system keeps radial head project planning centered on one implant family and one compatible 2.4 mm workflow.
Left and right configurations support side-specific project matching.
Three hole counts simplify evaluation without introducing unrelated plate families.
HA 2.4 cortical and HC 2.4 locking options align with the plate platform.
A micro-fragment locking set supports key preparation and insertion tasks.
Share the affected side, available imaging and project context.
Confirm left or right and the preferred 3H, 4H or 5H option.
List required locking and cortical screw lengths.
Provide instrument, sample, quantity, market and documentation needs.
配图建议11：XC Medico 创伤钢板精加工、螺钉检测、表面处理、质量检验和器械装配真实工厂照片拼图；建议尺寸 1400 × 1000 px。
B2B Support
XC Medico supports distributors and hospital projects with configuration matching, samples, documentation and orthopedic OEM and ODM services.
Plate side, size, screw and instrument coordination.
Sample, tender and distributor portfolio preparation.
Implant production and quality-control visibility.
Branding and packaging requirements by project.
The page uses the titanium Capitulum Radialis Locking Plate, the dedicated radial head plate family identified in the XC locking plate system.
The family includes 3H, 4H and 5H plates in left and right configurations.
The plate is matched with HA 2.4 cortical and HC 2.4 locking screws. The listed 2.4 mm ranges run from 6-30 mm in 2 mm increments.
The 1.5/2.0/2.4 mm Micro Fragment Locking Instrument Set supports the 2.4 mm guiding, drilling, measuring, tapping and T8 insertion workflow.
Share the affected side, preferred plate length, required screw lengths, instrument needs, destination market, quantity and documentation requirements.
Yes. A project package can combine the selected plate configuration, screw ranges, instrument set and relevant commercial documentation.
Send the preferred side, hole count, screw requirements, instrument needs, destination market and estimated quantity.
