Please Choose Your Language
You are here: Home » Femoral Shaft Fracture Fixation Solution

XC Medico Trauma Solutions

Femoral Shaft FractureFixation Solution

Femoral intramedullary nails and plate options, coordinated with compatible screws and dedicated instruments for your project.

Femoral shaft fixation portfolio with a femoral nail and plate shown as separate options
配图01:股骨全长模型,分别展示髓内钉与股骨弧形锁定板的独立应用方案,不要在同一根骨骼上叠加两种固定方式;1400 × 1100 px。植入位置须专业审核。
Femur anatomy highlighting the shaft between proximal and distal regions
配图02:股骨正侧位解剖图,英文标注近端、骨干部与远端,并突出骨干范围;1200 × 1000 px。不要将股骨颈或股骨远端骨折混入主题。

Start With the Shaft Segment

Build the request around the fracture location, implant family, screw platform and instrument set. Confirm the intended indication for the exact model and market.

Nail options

Femoral intramedullary and reconstruction nail families.

Plate options

A curved locking plate designated for femoral shaft fixation.

For a broader Intramedullary Nail portfolio, review the trauma nail range.

Implant Portfolio

Femur Nail and Plate Options

Compare the available fixation families, then confirm each model's approved indication and component match before ordering.

Non-Locking Femoral Plates

The femoral non-locking portfolio also includes LC-DCP Femoral Plate Broad and DCP Femoral Plate Broad, paired with HA 4.5 screws. For a shaft-fracture project, confirm that the exact configuration is covered by its product-specific IFU and local labeling.

Match the Nail and Instrument Set

Choose the implant family first. Then confirm the corresponding tray, targeting components, sleeves, reamers and drivers for the selected configuration.

Tray references: RQLG201 for the femur intramedullary nail set, RQZG201 for the new femoral reconstruction set, RQG2D01 for the reversed femoral and Gamma set. Trays ship without implants.

Femoral nail instrument trays with targeting arms, reamers, sleeves and drivers
配图07:股骨髓内钉器械盒与重建钉器械盒并列实拍,保留各自器械盘布局,清晰展示瞄准架、扩髓器、套筒与驱动工具;1400 × 1000 px。

A Clear Planning Sequence

A procurement overview for coordinating the product family, components and supply requirements.

Four-stage planning overview from imaging review to final configuration check
配图08:横向四步采购与配置概览:确认骨折部位、选择产品系列、匹配螺钉与器械、核对供货清单;1600 × 720 px。仅作系统规划展示,不出现手术操作参数。

This graphic is a product-planning overview, not surgical guidance.

System Selection Guide

Fracture Segment

Confirm the shaft location and any extension into adjacent regions before choosing the implant family.

Implant Geometry

For nails, confirm the required diameter, length and laterality. For plates, confirm the model and hole count.

Screws and Instruments

Match screw family, length range, targeting components and drivers to the exact implant reference.

Supply Requirements

Set quantities, packaging, documentation and destination-market requirements for the project.

Clinical selection and placement remain the responsibility of the treating surgeon. Confirm current product-specific instructions for use, approved indications and local labeling.

Real XC Medico factory photography showing implant production, inspection and instrument assembly
配图09:使用XC Medico真实工厂照片,组合展示植入物加工、检验与器械装配;1400 × 1000 px。不得使用AI生成的工厂照片。

Project Support

Support for Your Trauma Portfolio

Coordinate implant families, matching instruments and purchasing requirements for your hospital or distribution project.

Explore orthopedic OEM and ODM manufacturing support for product and packaging discussions.

Frequently Asked Questions

Which options are specifically listed for femoral shaft fixation?

The New Femoral Reconstruction Nail includes a standard locking indication for femoral shaft fractures. The Femoral Curved Plate is also listed for femoral shaft fixation. Confirm the exact model and market labeling before use.

Can non-locking femoral plates be considered for this project?

LC-DCP and DCP femoral plates are available with HA 4.5 screw options. Confirm that the selected model and intended use align with its current IFU and local labeling.

Which implant covers a retrograde or distal shaft pattern?

The Reversed Femoral Nail is the retrograde option in this portfolio, supplied in 200-300 mm and matched with 4.5 mm and 6.5 mm screws. Its proximal cut is shaped to reduce irritation at the patellar ligament. Confirm suitability for the case against the product IFU.

Does each nail family need its own instrument tray?

Yes. The standard femur nail set is RQLG201, the new femoral reconstruction set is RQZG201 and the reversed femoral and Gamma set is RQG2D01. Trays ship without implants, so nails and screws are ordered separately.

What information should we send for system matching?

Share the implant family, model or reference, required sizes, screw configuration, instrument set, destination market and estimated quantities.

Build Your Femoral Shaft System Request

Send your target implant families, screw and instrument needs, destination market and estimated quantity for a coordinated review.

Request System Matching

Review the full trauma and fracture fixation portfolio for related systems.

As a globally trusted Orthopedic Implants Manufacturer, XC Medico specializes in providing high quality medical solutions, including Trauma, Spine, Joint Reconstruction, and Sports Medicine implants. With over 19 years of expertise and ISO 13485 certification, we are dedicated to supplying precision engineered surgical instruments and implants to distributors, hospitals, and OEM/ODM partners worldwide.

Quick Links

Contact

Tianan Cyber City, Changwu Middle Road, Changzhou, China
86-17315089100

Keep In Touch

To know more about XC Medico, please subscribe our Youtube channel, or follow us on Linkedin or Facebook. We’ll keep updating our information for you.
© COPYRIGHT 2026 常州希程帝衫科技有限公司. ALL RIGHTS RESERVED.